New Online Industrial PH Controller ORP Meter Monitor Digital 0.02pH 1mV Upper Lower Limit Control Alarm pH Tester

performance characteristics

PH-110 industrial pH meter intelligent industrial pH meter, is the upgrading of products, the pH value of sewage continuous measurement and control, the device is suitable for the field of city sewage treatment plant, chemical industry, papermaking, printing and dyeing, pharmaceutical, electroplating and environmental protection etc..
According to the environment and characteristics of the water industry, combined with the international power supply standard, the electrical design specification of the special environment is taken into consideration. The 220V, AC and safe low voltage 24V, AC, 24V and DC power options are added.

The main features of this product

Factory standard, configuration Chinese interface, language menu.With English manual.
PH/ORP measurements can be carried out, upper and lower limit control, current output, digital communication
Can be set to automatic temperature compensation or manual compensation
PH high limit alarm, low limit alarm, double relay, the amount of hysteresis can be adjusted freely
Instrument mode isolation port, maximum loop resistance greater than 300
The voice alarm switch function, through the interface options set on or off
Liquid crystal backlight can select energy saving mode and automatically shut down on time
High performance CPU with good EMC performance
Password management, to prevent non professional staff misoperation

The main technical indicators

Measuring range: pH (0 – 14, pH); ORP (-1900 – +1900 mV)
Accuracy: + 0.02 pH + + 1 mV
Resolution: 0.01pH; 1mV
Stability: less than 0.02 pH/24 in less than 3 hours mV/24 hours;
PH standard solution: 4.00/6.86/9.18
Display mode: 128 * 64 dot matrix LCD
Temperature compensation: 0 – 100 DEG C manual / automatic (NTC10K)
Signal output: 4-20mA isolation protection, output maximum loop resistance 300
Alarm output: high and low limit alarm contact each set (3A/250, V, AC), normally open contact relay
Power supply: AC 220V + 10% 50Hz
Power consumption: less than 3W
Environmental conditions: (1) the temperature of 0 to 60 C (2) humidity is less than or equal to 85%RH

Size: 96 * 96 * 110mm (L* w * h)

About the probe display

Packing list

ph Controller=1 ph probe （5m and plastic）+ 1 controller
orp Controller=1 orp probe （5m and plastic）+ 1 controller
4 fluorine electrode=1 ph probe（5m and 4 fluorine）+1 controller
Glass electrode=1 ph probe（5m and 4 glass）+1 controller
ph probe=1 ph probe with 5m plastic
orp probe=1 orp probe with 5m plastic
only Controller=1 controller

FAQ

Q1:What language is the product menu interface？

A: The product interface is in Chinese.and the following description is accompanied by English description.

Q2:What should I pay attention to before placing an order?

A:This product is a multi-link, please select and confirm the product you need before ordering, then order

Multiple Colors Available

YIERYI

YIERYI brand was registered in 2016. The main products are refractometers, PH meters, tds, ec pens, soil meters, kitchen scales, and jewelry scales. In order to ensure the accuracy of the data, we gave up the low-cost chip, selected high-precision Taiwan imported and South Korea imported chips, the design chose a portable pen-type design, light, beautiful, and easy to carry. All products will be tested, calibrated and used by ourselves to ensure that the quality is qualified and then promoted. We want to let this healthy brand enter every family and every corner of the world, and pass on the dream of “world love, China made”!