3 in 1 Temp TDS EC Meter Digital Water Quality Purity Tester Portable Temperature Test Pen Detector for Drinking Water Aquarium

Features:

1. Multifunctional 3-in-1 water quality tester: TDS EC Temp

2. 4 modes can be switched at will

3. LCD display

4. High-precision alloy probe, corrosion resistance, fast measurement, reduce error

5. Suitable for various water quality tests

6. It is widely used in households, laboratories, farmland irrigation, fish tanks, sewage treatment, etc.

Specifications :

1. Measuring Range

Conductivity:0-9990 um/cm

Temp : 0.1-80.0°C 32.0-176.0°F

TDS:0-9990ppm

2. Accuracy: ±2%

3. N.W:23g

4. Size: 150x20x20(mm)

5，Battery: 2*LR41 batteries(not include)

Tips:

When the measured value exceeds 999, the screen displays
X10

Use Step

1.Remove the electrode protective cap before use

2.Press the on/off button,and immerse the meter into the solution.(the solution should not over the immersion line)

3.The instrument has four different modes, and you can switch between different modes by pressing the shift key

4 Wipe clean the electrode after using,turn off the meter and replace the protective cap

Packing List :

1, 1 x Soil EC/Temperature Tester

Note

1 .the instrument is a professional instrument,please using it under professional instructions to avoid instrument admage

2 .Avoid heat,direct sunlight

3. Instrument is non-waterpfoof,do not throw the instrument into the solution or make the solution over the immersion line,to avoid the circuit board short out

FAQ

1. Does this measuring instrument need batteries?

Yes, it needs 2*LR41 batteries, it is not included in the package, you can buy it locally

2. What should I do if I receive the goods but cannot use it normally?

Please refer to the instruction manual. If you have any questions, please contact customer service. If you encounter any non-artificial quality problems within one week after receiving the goods, you can contact us for replacement or refund.